Shows and events

Light plot, to scale

Truss, pipes and fixtures by type, with their weight and wattage.

The plan opens on "Stage", a 10.00 m (32' 10") by 7.00 m (23' 0") rectangle (70.00 m² (753 sq ft)) that you correct to your own measurements. Its line (line) is 4 cm thick. Already in place: 6 × box truss, 3 m, 4 × ellipsoidal spotlight, 3 × led par, 2 × moving head (spot), dimmer pack (12 channels).

Draw this plan

No account needed, right away.

How to use it

1. The audience is at the bottom. The front truss is at the bottom of the plan, the back truss at the top.
2. Place the fixtures on the truss and turn them toward what they light.
3. Each fixture carries a typical weight and wattage: correct them from your own spec sheet.
4. Name each fixture by its circuit number.

What Planimonde calculates for this plan

• The length of each side, written along the line and corrected with one click.
• The area of each closed outline and of each zone you mark out.
• Wall thickness: your measurements apply to the inside, the outside or the centre line, as you choose.
• The closing gap when on-site measurements contradict each other, and where it lies.
• The clearance to leave in front of each item, to suggest other layouts without overlap.
• The scale of the PDF, with a reference bar to check with a ruler once the page is printed.

In this plan's library

This plan type first offers these categories of items, which you resize to your measurements: Stage lighting, Truss, rigging and power, Stage and tech, Stage and scenery, Sound system, Free shapes.

What this plan is, and what it is not

Loads, rigging points and lifting: have them validated by a qualified rigger or engineer. The weights shown are typical values, not those of your equipment. Power needs are indicative: connection and distribution are done by a master electrician.

This notice is printed at the bottom of exports of this plan type. What a self-made plan can be used for

Related plans: shows and events

See the 268 plan types