Roofing plan, to scale
Slopes, ridge, dormers, chimney, vents and eavestroughs, seen from above.
The plan opens on "Roof", a 10.00 m (32' 10") by 8.00 m (26' 3") rectangle (80.00 m² (861 sq ft)) that you correct to your own measurements. Already in place: 2 × roof slope, ridge, chimney, roof vent, plumbing vent, skylight…
No account needed, right away.
How to use it
- The outline is the roof seen from above, overhangs included.
- Stretch a roof slope over each plane: the arrow shows the direction of the slope.
- Locate the chimney, vents, dormers and eavestroughs.
- Multiply the plan area by the pitch factor to get the surface to cover.
What Planimonde calculates for this plan
- The length of each side, written along the line and corrected with one click.
- The area of each closed outline and of each zone you mark out.
- Wall thickness: your measurements apply to the inside, the outside or the centre line, as you choose.
- The closing gap when on-site measurements contradict each other, and where it lies.
- The clearance to leave in front of each item, to suggest other layouts without overlap.
- The scale of the PDF, with a reference bar to check with a ruler once the page is printed.
In this plan's library
This plan type first offers these categories of items, which you resize to your measurements: Framing, roof and stairs, Front view, Free shapes.
What this plan is, and what it is not
This notice is printed at the bottom of exports of this plan type. What a self-made plan can be used for
Related plans: building and interior
FlooringThe area to cover and the material take-off.PaintingThe wall area to paint and the number of litres.StairsFlights, landing, treads and handrail, in plan view.Wall framingStuds, plates, headers and openings of a wall seen from the front.Shed, detached garage, carportA small backyard building and what goes in it.Home additionThe existing house and the part to add.