Converted container plan, to scale
Office, workshop or dwelling in a 20 or 40 ft container.
The plan opens on "20 ft container", a 5.90 m (19' 4") by 2.35 m (7' 9") rectangle (13.87 m² (149 sq ft)) that you correct to your own measurements. Its line (wall) is 8 cm thick. Already in place: double bed, van counter, van sink, wet bath, sliding door, window.
No account needed, right away.
How to use it
- Choose the container (20 or 40 feet, standard height or high cube).
- Allow for insulation: each finished wall takes 8 to 12 cm off the inside.
- Place the openings, then the furniture; at 2.35 m wide, only one side can be furnished.
What Planimonde calculates for this plan
- The length of each side, written along the line and corrected with one click.
- The area of each closed outline and of each zone you mark out.
- Wall thickness: your measurements apply to the inside, the outside or the centre line, as you choose.
- The closing gap when on-site measurements contradict each other, and where it lies.
- The clearance to leave in front of each item, to suggest other layouts without overlap.
- The scale of the PDF, with a reference bar to check with a ruler once the page is printed.
In this plan's library
This plan type first offers these categories of items, which you resize to your measurements: Beds and seats, Kitchen, water and bathroom, Power, heating and roof, Vehicle body, Office, Kitchen, Bathroom, Doors and windows, Free shapes.
What this plan is, and what it is not
This notice is printed at the bottom of exports of this plan type. What a self-made plan can be used for