Service vehicle plan, to scale
A plumber's, electrician's or technician's van: shelving, drawers, ladders.
The plan opens on "Cargo area", a 3.20 m (10' 6") by 1.78 m (5' 10") rectangle (5.70 m² (61 sq ft)) that you correct to your own measurements. Its line (wall) is 4 cm thick. Already in place: partition, 2 × van shelving, drawer unit, gas cylinders, ladder rack.
No account needed, right away.
How to use it
- Choose your van: the cargo area, wheel wells and doors place themselves.
- Place the shelving along the walls, above the wheel wells.
- Keep the centre aisle and the access through the side door.
- Ladders and pipes go on the roof: they are drawn dashed.
What Planimonde calculates for this plan
- The length of each side, written along the line and corrected with one click.
- The area of each closed outline and of each zone you mark out.
- Wall thickness: your measurements apply to the inside, the outside or the centre line, as you choose.
- The closing gap when on-site measurements contradict each other, and where it lies.
- The clearance to leave in front of each item, to suggest other layouts without overlap.
- The scale of the PDF, with a reference bar to check with a ruler once the page is printed.
In this plan's library
This plan type first offers these categories of items, which you resize to your measurements: Job site and service, Vehicle body, Loading and storage, Power, heating and roof, Free shapes.
What this plan is, and what it is not
This notice is printed at the bottom of exports of this plan type. What a self-made plan can be used for