Safety and emergency

Pre-incident plan, to scale

Access, fire hydrant, shut-offs, alarm panel, assembly point.

The plan opens on "Lot", a 40.00 m (131' 3") by 30.00 m (98' 5") rectangle (1,200.00 m² (12,917 sq ft)) that you correct to your own measurements. Already in place: double door, fire alarm panel, fire department key box, exit sign, fire hydrant, fire engine…

Draw this plan

No account needed, right away.

Lot · 12916.7 pi²131' 2 3/4"98' 5 1/8"131' 2 3/4"98' 5 1/8"Building · 2583.3 pi²65' 7 3/8"39' 4 1/2"65' 7 3/8"39' 4 1/2"FACPEXITCPStreet
The starting plan, as it opens in the editor.

How to use it

  1. Adjust the lot first: click its boundary, then correct its lengths in the panel on the right.
  2. Draw the building (C key) and place its entrances.
  3. Place the fire hydrant, the fire department connection, and the gas, water and electricity shut-offs.
  4. Connect the hydrant to the truck with the Link tool (L key): the hose length is shown.
  5. Have the plan validated by your fire department.

What Planimonde calculates for this plan

In this plan's library

This plan type first offers these categories of items, which you resize to your measurements: Response, emergency and signage, Fire protection, Outdoors, Doors and windows, Free shapes.

What this plan is, and what it is not

Plan drawn up by its author to prepare for an emergency response. It replaces neither the fire safety plan required by regulation nor the instructions of the fire department: have it validated by that department.

This notice is printed at the bottom of exports of this plan type. What a self-made plan can be used for

Related plans: safety and emergency

See the 268 plan types

Your cookie choices

Anything optional is off until you switch it on. You can change your mind at any time, from the "Cookies" link at the bottom of every page.

We remember your choice for 6 months, then ask again. Privacy