Fixed grid of a venue plan, to scale
The technical grid at the ceiling: pipes, rigging points, loads.
The plan opens on "Room", a 16.00 m (52' 6") by 12.00 m (39' 4") rectangle (192.00 m² (2,067 sq ft)) that you correct to your own measurements. Its line (wall) is 20 cm thick. Already in place: 4 × pipe or truss, 2 × rigging point, 2 × ellipsoidal spotlight, 2 × par 64.
No account needed, right away.
How to use it
- Draw the room, then each pipe of the grid at its real position.
- Name the pipes (P1, P2…) and note their maximum load in the name.
- Place the fixtures: each one's weight is used to check the load per pipe.
What Planimonde calculates for this plan
- The length of each side, written along the line and corrected with one click.
- The area of each closed outline and of each zone you mark out.
- Wall thickness: your measurements apply to the inside, the outside or the centre line, as you choose.
- The closing gap when on-site measurements contradict each other, and where it lies.
- The clearance to leave in front of each item, to suggest other layouts without overlap.
- The scale of the PDF, with a reference bar to check with a ruler once the page is printed.
In this plan's library
This plan type first offers these categories of items, which you resize to your measurements: Truss, rigging and power, Stage lighting, Stage and tech, Stage and scenery, Sound system, Free shapes.
What this plan is, and what it is not
This notice is printed at the bottom of exports of this plan type. What a self-made plan can be used for
Related plans: shows and events
Event signageEntrances, arrows, signs, services: what the visitor needs to find.Venue seating planStage, rows, aisles, reserved spaces and exits.WeddingHead table, guest tables, dance floor, bar.BanquetLong tables, buffet, lectern and service flow.Stage plotMusicians, amps, mics, monitors: the plan to send to the venue.Light plotTruss, pipes and fixtures by type, with their weight and wattage.