Networks and systems

Heating and ventilation plan, to scale

Furnace, ducts, registers, returns, air exchanger.

The plan opens on "House", a 10.00 m (32' 10") by 7.00 m (23' 0") rectangle (70.00 m² (753 sq ft)) that you correct to your own measurements. Its line (wall) is 15 cm thick. Already in place: 3 × door, 2 × window, furnace, 3 × supply register, return grille, thermostat…

Draw this plan

No account needed, right away.

House · 753.5 pi²32' 9 3/4"22' 11 5/8"32' 9 3/4"22' 11 5/8"Living areaKitchenBathroomT
The starting plan, as it opens in the editor.

How to use it

  1. Adjust the building first: click a wall, then correct its lengths in the panel on the right.
  2. Place the heating appliance, then the supply registers and return grilles.
  3. Pick the Link tool (L key): click one symbol, then another. A click on empty space adds a bend.
  4. Change a link's type: supply, return, gas, control.
  5. With nothing selected, the plan panel gives the total length of each link type.

What Planimonde calculates for this plan

In this plan's library

This plan type first offers these categories of items, which you resize to your measurements: Heating and ventilation, Electrical: lights and appliances, Doors and windows, Free shapes.

What this plan is, and what it is not

Sketch of intent. Fuel-burning appliances (gas, oil, wood) and their vents must be installed by qualified contractors, with the clearances set by the manufacturers; this plan does not confirm compliance with the codes.

This notice is printed at the bottom of exports of this plan type. What a self-made plan can be used for

Related plans: networks and systems

See the 268 plan types

Your cookie choices

Anything optional is off until you switch it on. You can change your mind at any time, from the "Cookies" link at the bottom of every page.

We remember your choice for 6 months, then ask again. Privacy