Networks and systems

Sprinkler system plan, to scale

Sprinklers and their range, valves, pipes, controller.

The plan opens on "Lot", a 24.00 m (78' 9") by 18.00 m (59' 1") rectangle (432.00 m² (4,650 sq ft)) that you correct to your own measurements. Already in place: building, outdoor tap, backflow preventer, 2 × solenoid valve, sprinkler controller, 2 × rotor sprinkler…

Draw this plan

No account needed, right away.

Lot · 4650.0 pi²78' 8 7/8"59' 0 5/8"78' 8 7/8"59' 0 5/8"House
The starting plan, as it opens in the editor.

How to use it

  1. Adjust the lot first: click its boundary, then correct its lengths in the panel on the right.
  2. Place the sprinklers: their circle or sector shows the watered area.
  3. Click a symbol surrounded by a dotted outline to set its range and its opening angle.
  4. Pick the Link tool (L key): click one symbol, then another. A click on empty space adds a bend.
  5. With nothing selected, the plan panel gives the total length of each link type.

What Planimonde calculates for this plan

In this plan's library

This plan type first offers these categories of items, which you resize to your measurements: Sprinklers and irrigation, Plumbing, Outdoors, Free shapes.

What this plan is, and what it is not

Plan of intent: ranges and flow rates are indicative. Check the pressure and flow of your water supply. A backflow preventer is required on a system connected to the municipal water supply, and many municipalities regulate watering.

This notice is printed at the bottom of exports of this plan type. What a self-made plan can be used for

Related plans: networks and systems

See the 268 plan types

Your cookie choices

Anything optional is off until you switch it on. You can change your mind at any time, from the "Cookies" link at the bottom of every page.

We remember your choice for 6 months, then ask again. Privacy