Solar panels plan, to scale
Panels on the roof or on the ground, inverter, connection.
The plan opens on "Roof", a 10.00 m (32' 10") by 7.00 m (23' 0") rectangle (70.00 m² (753 sq ft)) that you correct to your own measurements. Its line (line) is 4 cm thick. Already in place: 6 × rooftop solar panel, solar inverter, main panel, net metering meter.
No account needed, right away.
How to use it
- Adjust the outline of the roof; the middle line is the ridge.
- Place the panels: the plan panel counts them.
- Pick the Link tool (L key): click one symbol, then another. A click on empty space adds a bend.
- With nothing selected, the plan panel gives the total length of each link type.
- Export the plan: its notice states what it is and what it is not.
What Planimonde calculates for this plan
- The length of each side, written along the line and corrected with one click.
- The area of each closed outline and of each zone you mark out.
- Wall thickness: your measurements apply to the inside, the outside or the centre line, as you choose.
- The closing gap when on-site measurements contradict each other, and where it lies.
- The clearance to leave in front of each item, to suggest other layouts without overlap.
- The scale of the PDF, with a reference bar to check with a ruler once the page is printed.
In this plan's library
This plan type first offers these categories of items, which you resize to your measurements: Outdoor lighting, solar and EV charging, Electrical: panels and distribution, 12 V electrical, Outdoors, Free shapes.
What this plan is, and what it is not
This notice is printed at the bottom of exports of this plan type. What a self-made plan can be used for