Heat pump and ducts plan, to scale

Outdoor unit, wall-mounted or central units, lines and ducts.

The plan opens on "House", a 10.00 m (32' 10") by 7.00 m (23' 0") rectangle (70.00 m² (753 sq ft)) that you correct to your own measurements. Its line (wall) is 15 cm thick. Already in place: 3 × door, 2 × window, heat pump (outdoor unit), 2 × heat pump (wall unit), disconnect switch, thermostat.

Draw this plan

No account needed, right away.

The starting plan, as it opens in the editor.

How to use it

Adjust the building first: click a wall, then correct its lengths in the panel on the right.
Place the outdoor unit outside, then the indoor units.
Pick the Link tool (L key): click one symbol, then another. A click on empty space adds a bend.
The length of each refrigerant line is shown in its panel.
With nothing selected, the plan panel gives the total length of each link type.

What Planimonde calculates for this plan

The length of each side, written along the line and corrected with one click.
The area of each closed outline and of each zone you mark out.
Wall thickness: your measurements apply to the inside, the outside or the centre line, as you choose.
The closing gap when on-site measurements contradict each other, and where it lies.
The clearance to leave in front of each item, to suggest other layouts without overlap.
The scale of the PDF, with a reference bar to check with a ruler once the page is printed.

In this plan's library

This plan type first offers these categories of items, which you resize to your measurements: Heating and ventilation, Electrical: panels and distribution, Outdoors, Doors and windows, Free shapes.

What this plan is, and what it is not

Sketch of intent. Handling refrigerants and making the electrical connection are reserved for qualified contractors; this plan does not replace a heating and cooling load calculation. Also check municipal rules on noise and on where the outdoor unit may go.

This notice is printed at the bottom of exports of this plan type. What a self-made plan can be used for

Related plans: networks and systems

Central vacuumUnit, wall inlets and their reach, piping.Audio and video cablingScreen, receiver, speakers, projector and cables.Alarm and access controlControl panel, keypad, detectors, contacts, card readers, electric strikes.GeneratorOutdoor location, transfer switch, backed-up circuits, distances.Building electricalOutlets, switches, lights, panel and circuits.12 V electrical for a vanBattery, solar, fuses and appliances in a converted vehicle.

See the 268 plan types