Pool heater plan, to scale
Where to put the heat pump or the solar collectors, and the length of pipe to plan for.
The plan opens on "Backyard", a 18.00 m (59' 1") by 15.00 m (49' 3") rectangle (270.00 m² (2,906 sq ft)) that you correct to your own measurements. Already in place: building, in-ground pool, patio slabs, filter and pump, pool heater (heat pump).
No account needed, right away.
How to use it
- Draw the yard, the house and the pool.
- Place the filter, then the pool heater after it on the return line.
- Keep 60 cm (2 ft) clear around the heat pump and measure its distance to the neighbours.
- Draw the pipes: their length is shown.
What Planimonde calculates for this plan
- The length of each side, written along the line and corrected with one click.
- The area of the lot and of each zone, with the total per owner.
- The thickness of fences, hedges and low walls, on one side or the other of the measured line.
- The closing gap when on-site measurements contradict each other, and where it lies.
- The clearance to leave in front of each item, to suggest other layouts without overlap.
- The scale of the PDF, with a reference bar to check with a ruler once the page is printed.
In this plan's library
This plan type first offers these categories of items, which you resize to your measurements: Patio, pool and leisure, Outdoors, Fences, low walls and boundaries, Pavers, paths and decking, Free shapes.
What this plan is, and what it is not
This notice is printed at the bottom of exports of this plan type. What a self-made plan can be used for