Shows and events

Sound system plan, to scale

Speakers, subwoofers, monitors, console and snake.

The plan opens on "Room", a 20.00 m (65' 7") by 30.00 m (98' 5") rectangle (600.00 m² (6,458 sq ft)) that you correct to your own measurements. Its line (wall) is 20 cm thick. Already in place: stage or riser, 2 × line array (6 boxes), 2 × subwoofer, 2 × stage monitor, stage box, audio snake…

Draw this plan

No account needed, right away.

Room · 6458.3 pi²65' 7 3/8"98' 5 1/8"65' 7 3/8"98' 5 1/8"
The starting plan, as it opens in the editor.

How to use it

  1. Place the stage, then the main speakers on each side, facing the audience.
  2. Place the subwoofers on the floor and the monitors in front of the musicians.
  3. Set up the console on the centre line, two thirds of the way back, then draw the snake run.

What Planimonde calculates for this plan

In this plan's library

This plan type first offers these categories of items, which you resize to your measurements: Sound system, Stage and tech, Truss, rigging and power, Stage and scenery, Audience and seating, Doors and windows, Free shapes.

What this plan is, and what it is not

Loads, rigging points and lifting: have them validated by a qualified rigger or engineer. The weights shown are typical values, not those of your equipment. Power needs are indicative: connection and distribution are done by a master electrician.

This notice is printed at the bottom of exports of this plan type. What a self-made plan can be used for

Related plans: shows and events

See the 268 plan types

Your cookie choices

Anything optional is off until you switch it on. You can change your mind at any time, from the "Cookies" link at the bottom of every page.

We remember your choice for 6 months, then ask again. Privacy